|OBD power connector||To connect the car OBD port to charge.|
|GPS antenna||GPS accuracy: 10 meters, 2D RMS|
|SIM card slot||1 unit|
|GSM frequency||Global commonly used 4 frequencies|
Quad band(GSM 850/900/1800/
|GPS accuracy||10 meters, 2D RMS|
|GPS sensitivity||-159 dBm|
|Speed accuracy||0.1 meter/second|
|GPRS||Class 12, TCP/IP|
|Working voltage range||4.5-50V DC|
|Working temperature||-20~+70 ℃|
|Working humidity||20-80% RH|
|Stand-by working current||25 mA for 12 V|
|Operating system for phone APP|
Android 2.3 and higher, iOS 5.0
Length: 5 cm
Width: 2.9 cm
Height: 3.8 cm
The tracker supports remote voice monitoring.
Low power alarm
Alarm message will be created if battery power is too low.
Alarm message will be created if vehicle is shaking.
A range can be set on map and alarm messages will be sent once the tracker got in/out the range.
Historical route replaying
Historical moving route of the latest 3 months(at least) of the tracker can be replayed.
Base station positioning
Residual battery power display
Residual battery power of the tracker can be displayed on the computer webpage platform and phone APP.
Signal blind area storage
Positioning data will be saved when there is no GPRS signal until the signal found and the data uploded.
Electricity outage alarm
Alarm message will be created once the tracker is out of electricity supplying(has been pulled out of vehicle OBD port).